Clamp Meter 1000A AC/DC

1000A AC/DC digital clamp meter. The meter can be used to measure AC/DC voltage, current, frequency, resistance, capacitance, continuity, polarity and temperature. 1.8" LCD screen.
45 mm jaw opening for measuring current without breaking the circuit.
True RMS measurement <1KHz.
Voltage up to 1000V (CAT II) VDC and VAC.
Accurate readings thanks to the backlit 1.8" LCD screen

Measurement tests available:
o Voltage measurement:
- DCV: 400.0mV/4.000V/40.00V/400.0V/1000V
- ACV: 4.000V/40.00V/400.0V/1000V

o Current measurement:
- DCA: 400.0A/1000A
- ACA: 400.0A/1000A

o Resistance measurement: : 400.0Ω/4.000KΩ/40.00KΩ/400.0KΩ/4.000MΩ/40.00MΩ

o Capacitance measurement : 4.000nF/40.00nF/400.0nF/4.000uF/40.00uF/400.0uF/4.000mF

o Continuity check: 200Ω < 50Ω beep

o Diode test measurement: 2V

o Frequency measurement: 4.000Hz/40.00Hz/400.0Hz/4.000KHz/40.00KHz/40.00KHz/400.0KHz/4.000MHz

o Temperature range: -200 ~ 1200°C

o Non-contact voltage measurement: > 50VAC 50/60Hz

- Polarity indicator
- Automatic/manual range.
- Over Range indication: display ""OL""
- Data holding mode.
- MAX/MIN function.
- Relative value function: Yes
- Automatic power off function.
- Low battery indicator light.
- Battery: 3 x AAA 1.5V.
- Temperature: Operation: 0 ~ 40°C / Storage: -10 ~ 60°C

The set includes:
o pike jaw test lead set, spring loaded connectors 12.7 mm (0.5 inch) with jaw opening and serration, length 1m .
o Needle test lead set silicone leads 1m.
o Temperature sensor cable 1 m.
o quick guide.
o calibration report.
o Bag with strap.

CAT category: CAT II 1000V - CAT III 600V.
LVD: EN 61010-1
EN 61010-2-030
EN 61010-031
EN 61010-2-032
EN 61010-2-033
EMC: EN 61326-1.