Floor cover, self-adhesive 0.5x25m

The self-adhesive stair and floor protector Power Cover Original features a surface made of very dense synthetic fiber fabric (350g/m2), which withstands heavy wear. The texture of the surface ensures a sturdy footing, thus enhancing safety. The base of the product has a waterproof and self-adhesive film that also works on vertical surfaces. Therefore, no tape is required for installation. When removed, Power Cover leaves no marks or adhesive residues on the protected surfaces, and you can also reuse the product in the next location. The product captures dirt, which is easy to vacuum away. It does not contain harmful substances.

The product is installed directly from the roll and can be cut to the desired length. For protecting larger areas, Power Cover should be installed side by side. If a 100% moisture barrier is desired, Power Cover should be applied with a 10cm overlap or the seams should be taped with an appropriate protective tape.

Applications include floors, stairs, elevator walls and doors, windows, thresholds, frames, ceilings, etc. Suitable for both indoor and outdoor use.

Technical specifications
- Material weight: 350g/m2
- Thickness: approx. 2.5mm
- Puncture strength (CBR): 4.0kN
- Cone drop test ISO 13433: 10mm
- Water permeability: Impermeable
- Water absorption capability: 430% relative to its own weight
- Product storage: In a dry place