Safety helmet KASK Primero HIVIZ

A very comfortable full-face work helmet designed for everyone. Equipped with factory-installed reflective stickers for increased visibility, as well as afterglow headlamp clips. A versatile universal model with a multi-point harness that offers excellent fit, comfort and easy accessory attachment. Comprehensively certified according to both the industrial helmet standard and the electrical work standard. This is the right choice among Kask work helmets when you want the most comfortable and versatile model.
Designed for the construction industry, industry, electrical and energy sectors, etc.
A variety of eye and face protection can be quickly attached to the helmet with just a click thanks to the EasyClick quick-release fasteners. A mounting hole in the front for attaching a nameplate or headlamp with a clip. Easy-to-use removable fasteners on the sides for attaching a headlamp with a headband if necessary. Additional slot in the rear fasteners for carrying earplugs with a cord (e.g. Sordin SoftEar Cord) easily accessible and ready to use. Notches on the sides for earmuffs. Attachment points on the inside of the back for various neck protectors.

Outer shell Polypropylene HD, so it is lightweight, and the material shines with its shock absorption properties - especially in colder temperatures. The shell is also more wear-resistant than conventional materials, and easier to clean. Inside, expanded HD Polystyrene cell, which offers better shock absorption properties than strap-structured helmets. Minimizing areas in contact with the head improves wearing comfort. Pads DRY2 material, which effectively transfers moisture, providing comfort throughout the working day, and dries quickly.
Suitable for head circumferences of 52-63 cm.
Advanced Light harness keeps the helmet on even in difficult working positions. The wide 5-way adjustment of the harness ensures good compatibility with earmuffs. The orange color of the chin strap buckle indicates that this model is equipped with a chin strap that complies with the EN397 standard. The chin strap has a Ring To Hook loop that allows the helmet to be attached to work clothes or a gear backpack when it is not on.

Kask helmets offer good compatibility with other protective equipment.

Tested to protect the head according to the following test methods:
Mandatory requirements of the EN 397 standard:
5.1.1. For shock absorption caused by a single falling object (5 kg from a height of 1 m)
5.1.2. For a single object penetrating the helmet
5.1.3. For flame resistance
5.1.4. Regarding the opening of the chin strap, it remains closed after a 15 daN (kg) pull and opens after a maximum of 25 daN (kg) pull
EN 397 standard voluntary requirements:
5.2.1. Regarding protection in cold temperatures (-30 C)
5.2.3. Regarding protection against electric shock (unintentional short-term contact with live conductors 440 V A.C.)
5.2.4. Regarding protection against lateral compression
5.2.5. For protection against molten metal splash

Mandatory requirements of EN 50365:
Suitable for live work according to EN 50365 class 0 (1000 V A.C, 1500 V D.C)

Also protects according to the following requirements of EN 12492:
4.2.1.1 For shock absorption caused by objects falling from a height of more than one meter (5 kg from a height of 2 m)
4.2.1.2 For frontal impacts (5 kg from a distance of 0.5 m)
4.2.1.3 For side impacts (5 kg from a distance of 0.5 m)
4.2.1.4 For rear impacts (5 kg from a distance of 0.5 m)
4.2.2 For multiple objects penetrating the helmet (3 kg sharp weight from a height of 1 m) 2x)

All Kask helmets also protect against rotational impact brain injuries according to the Rotational Impact WG11 test methods based on the ECE 22.06 standard. The helmets are tested against impacts from different angles. Kask has defined a pass/fail criterion based on the general BrIC-Brain Injury Criter value. The risk of brain injuries increases when the “brick” value exceeds 0.68. A lower number corresponds to a lower risk of injury. All Kask helmets have a BrlC value of less than 0.39.
Maximum lifespan 10 years. Weight: 460 g. 3-year warranty against material and manufacturing defects. Certification: EN 397, EN 50365. Country of manufacture Italy.

Most popular accessories and supplies (also many others available):
Zen Visor Kit clear - eye protection + EasyClick quick-attach adapter set (WKI00002-)
Primero sweatband standard (WPA00020-)
Primero sweatband Comfort Fit thicker (WPA00013-)
Sordin Sharp Helmet Mic - communication hearing protection (84520-04-B-G-S)

Government Decree (205/2009) on construction safety, Chapter 13, Section 71: "A safety helmet must be worn on a construction site. If necessary, the helmet must be equipped with an underhood. In construction work, personal eye protection required by the work and working conditions must be used. The employer must provide employees with safety glasses in those jobs where there is a significant risk of eye injuries.